I upgraded the memory and ordered a touch screen, an eGalax resistive touch screen. I have windows 8 now working fine, the screen is actually flipped over so there is no keyboard and trackpad. It's all fine, but Windows only recognizes the touch screen as a mouse, and won't let me use any of the touch screen features.
- I upgraded the memory and ordered a touch screen, an eGalax resistive touch screen. I have windows 8 now working fine, the screen is actually flipped over so there is no keyboard and trackpad. It's all fine, but Windows only recognizes the touch screen as a mouse, and won't let me use any of the touch screen features.
- HI again: IM here again with a new POS trying to make a touchscreen work THIs is a POS from fujitsu, called TP8AS (i think this is a new version and there are no drivers on the fujitsu page).
- DriverMax – Mouse – eGalaxTouch – USB Touchscreen Controller(Universal) Computer Driver Updates. Enable Touch screen features. TavioGD Created on August 6, It is definitely an eGalax touch issue. The eGalax touchscreen addon is installable on any device with ThinOX Type troubleshooting in the search bar, click on troubleshooting.
- Apr 12, 2012 With the eGalax drivers direct from their site it works also (sometimes, need to install and uninstall a couple of times before it actually works for some odd reason) but as said it's treated as a mouse, there are different 'modes' in the software, but they all seem to make it into a mouse with different properties regulating how long pushes.
May 16th, 3. The Touch screen I use here was purchased from Deal Extreme. I’d love to uninstall the original eGalax driver Here is where do we need to find this module. This is pro, dude. May 15th, 2. Now it is time to edit xorg.
Uploader: | Duhn |
Date Added: | 14 October 2015 |
File Size: | 24.86 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 36664 |
Price: | Free* [*Free Regsitration Required] |
Hey Black God, thanks for the tutorial this looks like a really fun project!
DriverMax – Mouse – eGalaxTouch – USB Touchscreen Controller(Universal) Computer Driver Updates
Here is where do we need to find this module. This worked like a charm. I can only calibrate to one point, and even before doing this, regardless where I touched, the pointer would remain in the upper-left position of the screen. Note that this tool should be run X windows environment.
May 22nd, 6. Thank you for answer! Your email address will not be published. Touch” in my Samsung NC10 Tried every hint I found via searchengine bug reports on this, threads, even a newly developed driver to get the touchscreen working with evdev read somwhere this should be more responsive and with much less wakeups than original eGalax drivernothing works: Last Jump knc.usb page: May 22nd, 7.
The time now is New USB device controllet Bus Device June 4th, Hi DaveInTheWave, I have uploaded a video of this setup and demo in youtube and embedded the same in this post. Can you please explain it al little bit? The usbtouchscreen module loaded automatically.
I’d love to uninstall the original eGalax driver Thank you for the post! Leave a Reply Cancel reply Your email address will not be published.
The first step in getting this done is to compile the raspbian kernel with necessary kernel module. May 15th, 2. With the kernel option mentioned above this also occurs using evdev only no usbtouchscreen module needed This guide focuses on getting cntroller screen worked.
Logout and login back. How did you build the kernel without this error?? Results 1 to 10 of Correct tap behaviour was present out-of-the-box.
Mouse – eGalaxTouch – USB Touchscreen Controller(Universal) Computer Driver Updates
inv.usb June 3rd, 9. Thank you very much for the Tutorial. Join Date Nov Beans USB TouchController usb Download the source code from here. For details and our forum data attribution, retention and privacy policy, see here. The Touch screen I use here was purchased from Deal Extreme.
See Also
IM here again with a new POS trying to make a touchscreen work
THIs is a POS from fujitsu, called TP8AS (i think this is a new version and there are no drivers on the fujitsu page)
so im trying to install the touscreen (egalax)
drivers
http://www.eeti.com/drivers_Linux.html - Drivers - eGTouch_v2.5.5814.L-x
the guide tells me to compile the kernel( i did it with 3.0.101-63-pae and folloed the guide
https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/
everythin good , kernel compiled and booted BUT the touchscreen still doesnt work. ( and i might add the network doesnt work too, still checking why)
so the guide tells me to compile the kernel and add/remove some options using make menuconfig ( did it)
and then add some lines to evdev.c - mousedev.c - joydev.c ( did it and the kernel compiled with no errors. BUT on kernel 4.8.5 which is te one using the customer , i cannot compile it )
so now im stuck with a nother touchscreen.
can you help me?
let me know what you need
regards
Egalax Mice In House
Comments
Egalax Mice & Touchpads Driver Download
- Hi
Oh, finally some hardware I do have... an eGalax screen
See this thread on the openSUSE side;
https://forums.opensuse.org/showthread.php/447260-openSUSE-11-3-and-eGalax-TouchScreen
If still need some help I can dig out my 32bit 11 SP4 test system and screen, might be a day or so as have other things on my plate. - HI Again Malcolm:
I saw that thread but it doesnt apply to the new drivers and the ID its different.
there is a guide inside them that you need to follow to just install the drivers ( they ask you to compile a new kernel)
the thing is i did all that ( im contacting the vendor but no luck so far) , and the screen doesnt work
i was able to install the drivers, but no touch yet
hope you can enlighten me a bit how can i do it
have a great day
lsusb
Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 0acd:2030 ID Tech ValueMag Magnetic Stripe Reader
Bus 001 Device 005: ID 0eef:c000 D-WAV Scientific Co., Ltd
Bus 001 Device 006: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 007: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 008: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 009: ID 0eef:c000 D-WAV Scientific Co., Ltd
regards - Hi
Well not good news... it worked out of the box for me...
Can you post the hwinfo --usb into to see what it's doing.
HiOn Thu 05 Oct 2017 03:14:02 PM CDT, malcolmlewis wrote:
Hi
Well not good news... it worked out of the box for me...
Code:
lsusb
Bus 001 Device 003: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
TouchScreen
hwinfo --usb
04: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0
Unique ID: ADDn.lRwV_3FQLd1
Parent ID: k4bc.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: mouse
Model: 'D-WAV Scientific eGalax TouchScreen'
Hotplug: USB
Vendor: usb 0x0eef 'D-WAV Scientific Co., Ltd'
Device: usb 0x0001 'eGalax TouchScreen'
Revision: '1.00'
Compatible to: int 0x0210 0x0000
Driver: 'usbtouchscreen'
Driver Modules: 'usbtouchscreen'
Device File: /dev/input/mice (/dev/input/mouse2)
Device
Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event8, /dev/char/13:72, /dev/input/by-id/usb-eGalax_Inc._USB_TouchController-event-if00, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event, /dev/char/13:34, /dev/char/13:63
Device Number: char 13:63 (char 13:34) Speed: 1.5 Mbps
Module Alias: 'usb:v0EEFp0001d0100dc00dsc00dp00icFFiscFFipFF'
Driver Info #0:
Buttons: 0
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)
Can you post the hwinfo --usb into to see what it's doing.
OK, so I looked at the script, it uses uinput and blacklists
usbtouchscreen and install it's calibration tools etc.
You didn't need to rebuild the kernel, all that was needed to be done
was run the command mkinitrd so it will apply the blacklist.
So with the device plugged in to the USB port (Hopefully USB 2.0 and
not 3.0) you should see the device preset and using uinput?
If it's still showing usbtouchscreen then I would surmise the blacklist
didn't work.
--
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below... Thanks!- Hi:
can i ask for a little guide on how to accomplish that please?
im still new on linux and dont know how to black list and run mkinitrd?
i know that mkinitrd has to be ran on the /boot , at least thats where i was able to run it once i did the kernel compilation.
i will appreciate , a lot, if you can give me the steps to do it
regards - Hi
If you run the command;Does your USB device still use usbtouchscreen?
You just need to run the command mkinitrd to rebuild intird, the system knows where to look and what to do
You can also check if the uinput module is present in your kernel and loaded with; - HI Again:
here is th eoutput
/sbin/modinfo uinput
lsmod |grep uinput
this command do not return anything
Does your USB device still use usbtouchscreen?
I dont have an answer, this is a POS from fujitsu and eveything is integrated, but it uses USB to connect the screen internally
Let me know what else can we do to make this screen works
regards - HI:
so i did this:
and nothing happened, the screen only works under the mouse arrow , i can click if i put the arrow over anything . but doesnt move
regards
HiOn Wed 11 Oct 2017 03:34:04 PM CDT, Moratorro wrote:
HI:
so i did this:
Code:
vim etc/modprobe.d/blacklist.conf
### Beginning: blacklist usbtouchscreen ###
blacklist usbtouchscreen
### End: blacklist usbtouchscreen ###
sudo /sbin/mkinitrd
and nothing happened, the screen only works under the mouse arrow , i
can click if i put the arrow over anything . but doesnt move
regards
Since uinput isn't loaded, please run the commad;Then the hwinfo command again.
--
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below... Thanks!- HI
Ran
sudo /sbin/modprobe uinput
thats the output.
mind you that right now i have a clean install, i havent installed anyting from the egalax package.
if i check the guide and check the uinput:
ls uinput -al
crw-r1 root root 10, 223 Oct 11 14:46 uinput
ls hidraw* -al
crw-rw---- 1 root root 249, 0 Oct 11 12:52 hidraw0
crw-rw---- 1 root root 249, 1 Oct 11 12:52 hidraw1
crw-rw---- 1 root root 249, 2 Oct 11 12:52 hidraw2
crw-rw---- 1 root root 249, 3 Oct 11 12:52 hidraw3
crw-rw---- 1 root root 249, 4 Oct 11 12:52 hidraw4
according to the guide, the handlers on this output should be blank if i compile the kernel with the options requested:
i will upload the guide as soon i find a upload button.
let me know if you need anything else
regards
HiOn Wed 11 Oct 2017 06:24:02 PM CDT, Moratorro wrote:
HI
Ran
sudo /sbin/modprobe uinput
Code:sudo /usr/sbin/hwinfo --usb | grep eGalax
Model: 'D-WAV Scientific eGalaxTouch EXC3188-2414-08.00.00.00'
Device: usb 0xc000 'eGalaxTouch EXC3188-2414-08.00.00.00'
Device
Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event10, /dev/char/13:74, /dev/input/by-id/usb-eGalax_Inc._eGalaxTouch_EXC3188-2414-08.00.00.00-event-mouse, /dev/input/by-path/pci-0000:00:14.0-usb-0:10:1.0-event-mouse, /dev/char/13:33, /dev/input/by-id/usb-eGalax_Inc._eGalaxTouch_EXC3188-2414-08.00.00.00-mouse, /dev/input/by-path/pci-0000:00:14.0-usb-0:10:1.0-mouse, /dev/char/13:63
Model: 'D-WAV Scientific eGalaxTouch EXC3188-2414-08.00.00.00' Device:
usb 0xc000 'eGalaxTouch EXC3188-2414-08.00.00.00' Device
Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event11, /dev/char/13:75, /dev/input/by-id/usb-eGalax_Inc._eGalaxTouch_EXC3188-2414-08.00.00.00-event-mouse, /dev/input/by-path/pci-0000:00:14.0-usb-0:13.2.3.3:1.0-event-mouse, /dev/char/13:34, /dev/input/by-id/usb-eGalax_Inc._eGalaxTouch_EXC3188-2414-08.00.00.00-mouse, /dev/input/by-path/pci-0000:00:14.0-usb-0:13.2.3.3:1.0-mouse, /dev/char/13:63
thats the output.
mind you that right now i have a clean install, i havent installed
anyting from the egalax package.
if i check the guide and check the uinput:
ls uinput -al
crw-r1 root root 10, 223 Oct 11 14:46 uinput
ls hidraw* -al
crw-rw---- 1 root root 249, 0 Oct 11 12:52 hidraw0
crw-rw---- 1 root root 249, 1 Oct 11 12:52 hidraw1
crw-rw---- 1 root root 249, 2 Oct 11 12:52 hidraw2
crw-rw---- 1 root root 249, 3 Oct 11 12:52 hidraw3
crw-rw---- 1 root root 249, 4 Oct 11 12:52 hidraw4
according to the guide, the handlers on this output should be blank if i
compile the kernel with the options requested:
Code:
I: Bus=0003 Vendor=0eef Product=c000 Version=0111
N: Name='eGalax Inc. eGalaxTouch EXC3188-2414-08.00.00.00'
P: Phys=usb-0000:00:14.0-10/input0
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input10
U: Uniq= H: Handlers=mouse1 event10>>>> should be blank
B: PROP=0
B: EV=1b
B: KEY=c03 0 30001 0 0 0 0 0 0 0 0
B: ABS=1ff00 1003fff
B: MSC=10
I: Bus=0003 Vendor=0eef Product=c000 Version=0111
N: Name='eGalax Inc. eGalaxTouch EXC3188-2414-08.00.00.00'
P: Phys=usb-0000:00:14.0-13.2.3.3/input0
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3.3/1-13.2.3.3:1.0/input/input11
U: Uniq= H: Handlers=mouse2 event11 --_>>>>> this one too
B: PROP=0
B: EV=1b
B: KEY=c03 0 30001 0 0 0 0 0 0 0 0
B: ABS=1ff00 1003fff
B: MSC=10
i will upload the guide as soon i find a upload button.
let me know if you need anything else
regards
Can you post a link to the guide?
--
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below... Thanks!